In Clean Room we perform cutting reinforcement fabrics and prepregs as well as laser-assisted layup on the mold.
Purpose: Provides condition required for handling composites.
Specification | |||||
---|---|---|---|---|---|
Range of purity (ISO) |
Temperature range |
Temperature maintenance |
Humidity | Precision | Filters |
cutting zone - 8 layup zone - 7 |
19...24 °С | ± 1,5 °С | 35...55% | ± 3 % | HEPA |
Zund G3 M-1600
Universal cutter
Manufacturer: Zund
Purpose: cutting of reinforcement layers.
A stack of layers is calculated in the software FiberSIM then cutting template is fed into cutter system in required format.
Specification | |
---|---|
Working area | 1330 x 1600 mm |
Height of material | 25 mm |
Max. cutting speed | 1 m/s |
Max. acceleration | 9,1 m/s2 |
Physical positioning accuracy | ±0,1 mm |
Repeatability | ±0,03 mm |
Maximum tool rotation frequency | 18 000 per/min (rotating knife) 10 200 per/min (oscillating knife) 50 000 per/min (milling unit) |
Spindle 1 kW, maximum rotation frequency 60 000 per/min |
|
Conveyor system of material feed |
LAP CAD-PRO 3D
Multicolor laser projector
Manufacturer: LAP-LASER
Purpose: optic marking and preform layup.
Stack of layers is calculated in FiberSIM software then layer-to-layer projection is developed and fed into laser projector system.
Specification | |
---|---|
Laser wave length | 532 nm (green) 635 nm (red) |
Laser power | less 5mW |
Laser class | 2М/3R |
Projection accuracy | ±0,5 mm on 4 m distance |
Width line | 1 mm on 4 m distance |
Size of operation field | 2500х2500 mm |